Sennheiser DMI-8-Digital Microphone Interface

The Digital Microphone Interfaces in general

• The capability of cascading up to 128 channels
• D-sub 25 outputs with Tascam® and Yamaha® pin assignments
• Optical ADAT® interface
• Open architecture for later connection to other multi-channel interfaces and audio networks, such as EtherSound® and MADI

The DMI-8 offers several possibilities for easy integration into audio networks. The ES100 (DMI-8) module permits integration into EtherSound networks.Explanation Mode 2:The DMI performs a frequency/phase comparison between the word clock signal recovered from the mic signal, and the word clock of the DMI. From the phase deviation thus determined, the DMI calculates a control signal which is transmitted via the remote control data stream to the mic, where it controls the frequency of the internal quartz oscillator.

AES42 input: 8 x XLR 3F (Audio data in accordance with AES/EBU (AES3) data format, Digital phantom power (DPP) and remote control data

AES/EBU output (AES3 Data format): 2 x SUB-D25 Yamaha® and Tascam® pinoutADAT®: 1 x Toslink, up to 48 kHz

GN OUT: 1 x RJ 45 (special serial data format developed by GN, used as a gateway for integration in audio networks. The GN signal will be used by Neumann’s Multi Channel Audio Interface (MCA) for converting of the GN data format to formats such as EtherSound®, MADI, etc. (MCA available as option)Word Clock (AES11): 2 x BNC for internal and external synchronization

CTL Bus (RS 485): 2 x RJ 45 ports (connection to computer USB port via the Neumann USB 485 interface converter, connected in parallel for cascading purpose)

User port: 9-pin SUB-D, 1 switch function per channel (mute and/or Light 1/2 selectable)

AES/EBU OUTPUT Routing

• The AES/EBU signal includes 2 audio channels
• The distribution of the audio data of adjacent mono microphone channels between the audio channels of the corresponding AES/EBU output signal is as follows:

Channel 1 AES/EBU out Left: mic 1  Right: mic 2Channel 2 AES/EBU out Left: mic 3  Right: mic 4Channel 3 AES/EBU out Left: mic 5  Right: mic 6Channel 4 AES/EBU out Left: mic 7  Right: mic 8

Digital stereo microphones are supported at odd numbered AES42 microphone inputs only. In this case the audio data of the microphone are routed to the left and right channels of the corresponding AES/EBU output.

Technical Data

• Operating temperature: 0 °C … +45 °C
• Storage temperature: –20 °C … +70 °C
• Relative humidity: max. 90 % at +20 °C
• AES42 inputs: 8x XLR3F , Audio data in accordance withAES/EBU (AES3) data format, Digital phantom power (DPP)Remote control data
• Phantom power (DPP): +10 V, max. 250 mA per channel, short-circuit proof
• Remote control data: Pulses (+2 V), superimposed on the phantom power, approx. 750 bits/s or 9,600 bits/s (depending on the microphone)
• Outputs: 2x SUB-D 25, AES/EBU (AES3) data format, Yamaha® and Tascam® pinout,  1x Toslink, ADAT® format up to 48 kHz, 1x RJ 45, GN format up to 192 kHz, incl. power-out pin: approx. +15 VDC, max.1 A, short-circuit-proof
• Sampling rates supported: 44,1 / 48 / 88,2 / 96 kHz /176,4 kHz/ 192 kHz
• Microphone synchronization: AES42 – Mode 2 (synchronous mode) Microphone clock control via PLL
• DMI-8 Synchronization: Automatically to an external word clock or AES11 signal, if present, otherwise the internal word clock generator is activated.
• Word clock (or AES11) input: BNC
• - Vin: >100 mV at 75 ohms
• Word clock (or AES11) output: BNC
• - Vout: = Vin (external synchronization)
• - Vout: Approx. 1.5 V at 75 ohms  (internal word clock generator)
• Internal word clock generator: 44.1 / 48 / 88,2 / 96 kHz / 176.4 / 192 kHz, Accuracy ±25 ppm
• Indicators: Power, Ext Word Clock, Valid, Level (microphone)
• Control elements: 8x Channel Select GAIN +/–
• Control bus: 2 x RJ 45 ports; connection to computer USB port via the Neumann USB 485 interface converter; connected in parallel for the purpose of cascading. RS 485 with additional power-out pin (approx. +11.3 V, max. 500 mA)
• Device address (ID): 0 to 15, adjustable via coding switch on the back of the device
• User port: 9-pin sub-D, 1 switch function per channel (Mute and/or Light 1/Light 2 selectable)
• Power supply: 90 V to 240 V; 50/60 Hz
• Power consumption: < 55 VA
• Dimensions (W x H x D): 483 x 88 x 210 mm
• Weight: Approx. 2.8 kg

Specifications