Crestron® Automation 1 Module High Enclosure

<p>Designed to house the Crestron&reg; CLX Series lighting control modules, CLX-DIN-AP3 3-Series Control System&reg;, or PAC2M control system. CAEN enclosures are available in an assortment of sizes, and are suitable for surface or flush wall-mount installation. Each model has been engineered to provide a clean and manageable installation and has abundant provisions for wire termination and electrical knockouts.<br /></p><p>The CAEN Series automation enclosures are designed to house the Crestron&reg; CLX Series lighting control modules, CLX-DIN-AP3 3-Series Control System&reg;, or PAC2M control system. CAEN enclosures are available in an assortment of sizes, and are suitable for surface or flush wall-mount installation. Each model has been engineered to provide a clean and manageable installation and has abundant provisions for wire termination and electrical knockouts.<br /><br />CAEN automation enclosures are designed to use space efficiently, supporting over a hundred possible circuits in the largest model. Both centralized and distributed configurations are possible. A single PAC2M control system installed in a central enclosure can support numerous satellite extension enclosures distributed throughout a residence or commercial facility. Interconnection of the complete network of enclosures requires just one circulating Cresnet&reg; cable. Dozens of keypads, touch screens, wall box dimmers, shade controllers, and other peripherals can also be terminated within an enclosure, with separate compartments provided for high- and low-voltage wiring.<br /><br />Crestron lighting and automation systems are completely convection cooled for silent and reliable operation. A vented front cover is included with every enclosure. All models are constructed of 16-gauge galvanized steel and are pre-drilled for mounting CLX-DIN-AP3 control systems, PAC2M control systems, CLX Series modules, CLT Series terminal blocks, power supplies, and CAEN-BLOCK terminal blocks. Additional non-CLX Series lighting modules and third-party contactors may be installed using Crestron's CAEN-UMP universal mounting plates. Grounding blocks and low-voltage partitions are included.<br /><br />CAEN enclosures are also well suited for all types of Class 2 and Class 3 applications including voice and data structured wiring, security, and RF signal distribution (as permitted by applicable codes).<br /><br />CAEN enclosures are UL and C-UL listed. If you require a complete UL Listed panel, Crestron offers this service through its UL Listed panel shop, providing complete in-factory system configuration and assembly.<br /><br /><strong>Key Features</strong><br /></p><ul><li>Enclosures for CLX Series lighting control modules, the CLX-DIN-AP3 3-Series Control System&reg;, and the PAC2M automation control system<br /></li><li>Available in six convenient sizes<br /></li><li>Surface or flush wall-mountable<br /></li><li>Built to enable over 100 dimmer-controlled circuits per enclosure<br /></li><li>Support for centralized and distributed system configurations<br /></li><li>Residential and commercial applications<br /></li><li>Quiet and reliable, with efficient convection cooling<br /></li><li>Galvanized steel backbox with grounding blocks, low- voltage partitions, and vented front cover<br /></li><li>Additional mounting and termination accessories available<br /></li><li>For 120 and 230 Volt systems<br /></li><li>Additional uses for non-lighting applications such as voice and data structured wiring, security, and </li><li>RF signal distribution<br /></li><li>UL Listed panel shop fabrication service available<br /></li></ul>