Key Digital® 4K Power Over HDBaseT/HDMI (Tx + Rx Set) Extenders

<p><strong>HDBaseT via Single CAT5e/6 UTP/STP Extension</strong></p><ul><li>With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length</li></ul><p><strong>KD-X222PO</strong></p><ul><li>Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply</li></ul><p><strong>Signal Extension</strong></p><ul><li>Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling</li><li>Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6UTP/STP cabling</li><li>Up to 250 ft. @ 1080p /1920x1200 using KD-CAT6STP1X cabling</li><li>Up to 230 ft. @ 1080p /1920x1200 using third-party CAT5e/6 cabling</li></ul><p><strong>HDCP 2.2 </strong></p><ul><li>Compliancy up to HDCP 2.2 and backward compliant</li></ul><p><strong>HDR (High Dynamic Range) </strong></p><ul><li>More life-like images through a greater range of luminance levels</li></ul><p><strong>4K/UHD Resolution </strong></p><ul><li>Supports signals up to 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz [4:2:2] 12bit, and 4096x2160 30Hz [4:4:4] 8bit</li></ul><p><strong>Deep Color Support</strong></p><ul><li>Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit</li></ul><p><strong>3D</strong> </p><ul><li>Support for standard 3D stereoscopic signal formats</li></ul><p><strong>Low Profile </strong></p><ul><li>Super slim chassis design</li></ul><p><strong>HDMI&reg; and HDCP Licensing </strong></p><ul><li>Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s</li></ul><p><strong>EDID Control</strong></p><ul><li>Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx</li></ul><p><strong>Hot Plug Detection Control</strong></p><ul><li>Enables integrator to choose if active signal voltage is forced to connected input devices</li></ul><p><strong>Full Buffer System&trade;</strong></p><ul><li>Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control</li></ul><p><strong>IR Sensor </strong></p><ul><li>Sensor powering via +5V on Rx unit&rsquo;s IR In port collects line-of-sight IR from remote(s) without external IR connecting block</li></ul><p><strong>Up/Down IR </strong></p><ul><li>Two channels of IR enable control to/from devices connected to Tx and Rx units</li></ul><p><strong>RS-232 </strong></p><ul><li>Bi-Directional control to/from Tx and Rx unit on Phoenix connector</li></ul><p><strong>Rotary Switch RS-232 Control Mode </strong></p><ul><li>Provides control of Tx unit as well as connectivity status</li></ul><p><strong>Lossless Compressed Digital Audio </strong></p><ul><li>Support for Dolby&reg; TrueHD, Dolby&reg; Digital Plus, Dolby Atmos&reg;, and DTS-HD Master Audio&trade;</li></ul><p><strong>CEC Support</strong></p><ul><li>For inter-device control between input and output HDMI channel</li></ul><p><strong>I2C Communication</strong></p><ul><li>EDID and HDCP authentication to Display and Source</li></ul><p><strong>Control System Support</strong></p><ul><li>Fully controllable by all RS-232 supported control systems via open API: Compass Control&reg;, AMX&reg;, Crestron&reg;, KNX&reg;, RTI&reg;, Savant, URC&reg;, Leviton&reg; etc.</li></ul><p><strong>General Information</strong></p><ul><li>Regulation: CE, RoHS, WEEE</li><li>Enclosure: Black Metal</li><li>Product (Each): 4.1&rdquo; x 2.8&rdquo; x 0.875&rdquo;, Weight: 0.75 lbs</li><li>Power (Tx Only): KD-PS12V2ASC, 12V/2A, 100-240VAC, 50-60Hz, Interchangeable head with screw-in connector</li><li>Accessories: (2) Mounting Brackets, (1) IR Emitter, (1) IR Sensor</li></ul>