The IWA-250 switch mode amplifier is a slim, powerful dedicated design in a heavy-duty 1U rack mount case. Delivering up to 250 watts into 4 ohms, a single IWA-250 will power single or dual IWS-10's to provide higher power levels for larger rooms or to meet customer demands. Read More
Rigid, high quality steel case
Switch mode power supply
Class D power amplifier delivering up to 250 watts into 4 ohms (dual IWS-10 drivers)
High efficiency design resulting in cool running – low thermal output
DSP controlled with advanced limiters
<0.5watt standby power consumption (ErP certified)
DC short circuit protection, over-current and thermal protection
General Specs | |
| Depth (in.) | 10.36 |
| Height (in.) | 1.72 |
| Impedance | 4 Ohms |
| Width (in.) | 17.01 |
| Manufacturer Warranty | 5 Year |
| Analog Audio(RCA) Input | 1 |
| Headset Jack | Yes |
| Product Weight (lbs.) | 10 |
| Color | Gray |
General | |
| System Format | Active sub-woofer amplifier |
| Lower Frequency Limit | 25 Hz |
| Upper Frequency Limit | Variable 40 – 120 Hz @ 24 dB/Octave |
| Amplifier Output | 250 W @ < 1% THD+N |
| Drive Unit Complement | 4 - 8 ohms |
| Amplifier Classification | Class D amplifier with Switch mode power supply (SMPSU) |
| Cabinet Support | For use when using the dedicated back box |
| EQ | Music/ Movie/ Impact |
| Phase Control | 0 & 180 degrees |
| Auto Sensing | Line Level > 3.5mV |
| Input Level Requirements | Standby after approximately 15 minutes if no signal sensed |
| Input Impedance | > 20K Ohms |
| Mains Input Voltage | AC 110 - 120 V ~ 50/60Hz AC 220 - 240 V ~ 50/60Hz (Factory Region Preset) |
| Dimensions (H x W x D) | 43.7 x 432 x 263 mm (1.75 x 17 x 10.38) |
| Connection | LFE in (Stereo RCA and Balanced), 12v; Trigger in (3.5 mm mono mini-jack), left and right speaker output |
| Trigger Input | 5 - 12v via 3.5 mm mono mini-jack socket |
| Power Consumption | Standby: < 0.5 W (ErP approved); Typical Idle: < 10 W Max Rated: 200 W |
| Weight (unpacked) | 4 kg (8 lb 12 oz) |
